{ "numMessagesInTopic": 5, "nextInTime": 1541, "senderId": "k8HSi8FMDr4iV33R3OqpqIGvbBtEvm9a3FyRgTjeK2IAYawD5s-dxvr_ft-IqyLWxXTQGEme_-VEWX3C5qcdRKceuKO_1cbkxc-Q9A", "systemMessage": false, "subject": "Re: [01v96] Large Mass of Digital Noise Problem?????", "from": "Mike McMillan <mike@...>", "authorName": "Mike McMillan", "msgSnippet": "I don t know if this helps but, out of curiosity, I recently unplugged the ADAT optical i/p to my 01V96 (with o/p levels from mixer fairly low and only into", "msgId": 1540, "profile": "mikesounds1947", "topicId": 1537, "spamInfo": { "reason": "0", "isSpam": false }, "replyTo": "LIST", "userId": 172456712, "messageBody": "
>--
\n>Anyway he found the channels that all the noise was coming down
\n>and traced it to one adapt input on the card in the back of the
\n>console. He pulled the optical cable from that port and plugged it
\n>into the onboard adapt input. The noise reappeared on the channels
\n>that that port was patched to. He then pulled that optical cable and
\n>reset the digimax, installed a fresh cable and all was well again.
\n>Tomorrow during the day he is going to try to reproduce that
\n>problem. I believe the noise could be compared to pink noise. My
\n>question is could just a bad optical cable cause this? Should I
\n>contact Presonous and ask if it could be one of their converters in
\n>the unit?
\n
\n