{ "numMessagesInTopic": 28, "nextInTime": 1725, "senderId": "Lmi_n01QalWAEIFPib20Zr9G-9W8ItRXr_S0lB8eiRSLZE_6-IkWuPpxOBFCNK-K_qe0CZVm41NJ5maIMAkjKDUtU5q9rbI", "systemMessage": false, "subject": "Re: just got it...", "from": ""stefenator" <smaffei@...>", "authorName": "stefenator", "msgSnippet": "... however, there ... you have ... keyboard) ... well, if that s the case, I could run the guitar, bass and keys into those XLRs and use the ones up top for", "msgId": 1724, "profile": "stefenator", "topicId": 1685, "spamInfo": { "reason": "0", "isSpam": false }, "replyTo": "LIST", "userId": 143313187, "messageBody": "
> i can add a bit.however, there
\n>
\n> dave is correct! the "MY" cards provide the same XLR input.
\n
> is no preamp. if you plug a mic into it, you won't hear anything.you have
\n
> to buy an external mic pre! if you plug a line-level source (i.e.keyboard)
\n
> you'll be fine.well, if that's the case, I could run the guitar, bass and keys into
\n
\n
>external
\n> if you go this route, you would have to do the following. get an
\n
> mic pre (or mixer with direct outs). plug the mic into the mic pre orMY16-AT
\n> mixer, then from the mixer to the "MY" card. its the same for the
\n
> card. i bought an external mic pre (presonus) and plugged the micsinto the
\n
> presonus, then from the presonus to the "MY" card.couldn't you run the output to a digital input on the 01V96?
\n
\n
>for the
\n> now here is the kicker. the only reason i kicked out the big bucks
\n
> presonus digimax is sheerly personal preference for staying digital.if you
\n
> use a mic pre or mixer that doesn't have digital out, then basicallyyour
\n
> signal will go through analog/digital conversion at the mixer andagain when
\n
> you enter the v96. the digimax allows me to go through oneanalog/digital
\n
> conversion, then i stay in the digital realm and pass the signaldigitally
\n
> to the v96.that was
\n>
\n> granted, there are cheaper mic pres out there. i tried to use one
\n
> more/less comparable to the pres on the v96. it was just a matter ofstereo
\n> preference. there are cheaper routes to take.
\n>
\n> digimax - retail about $1300, in stores for around $1000
\n> digimax lt - reatil about $900, in stores for around $700
\n> ebay is between $650 - $800
\n> (all US dollars)
\n>
\n> if you really want to save money and tracks. i've seen this done a lot.
\n> take all the drum mics and push it into a cheap mixer, then push a
\n
> out to the v96 with two channel (L/R) via channels 13/14. you willfree all
\n
> your XLR inputs for mics and still have two channels for keys andsomething
\n
> else.I'm doing that right now, but I want the drum mics directly into the
\n
\n
>me some
\n> hope this helps.
\n>
\n> preston
\n>
\n> _____
\n>
\n> From: Dave Howard [mailto:david.howard@v...]
\n> Sent: Tuesday, July 06, 2004 3:08 PM
\n> To: 01v96@yahoogroups.com
\n> Subject: Re: [01v96] Re: just got it...
\n>
\n>
\n> I went with the Behringer model, but I believe it could be causing
\n
> sound degradation. Anyway, I've heard the Presonus Digimax is apretty good
\n
> unit and it is "only" $1,300.The
\n>
\n> stefenator wrote:
\n>
\n>
\n> --- In 01v96@yahoogroups.com, "Dave Howard" <mailto:david.howard@v...>
\n> <david.howard@v...> wrote:
\n> > Be careful with the XLR Expansion card. I purchased it and was
\n> > surprised to find out that it needs to be fed a line-level signal.
\n
> > other thing is you do not have a trim on it. I would save themoney and
\n
> > get one of them there fancy boxes with the 8 inputs.others.
\n>
\n> I was under the impression that this expansion card (MY4AD) is the
\n> same as the first 12 XLR inputs of the 01V96? Does anyone else have
\n> experience with this board and could shed some light on this?
\n>
\n> which fancy box (model #) are you refering to Dave? ;o)
\n>
\n> Thanks,
\n>
\n> Steph
\n>
\n>
\n>
\n>
\n> >
\n> > Dave H
\n> >
\n> > -----Original Message-----
\n> > From: stefenator [mailto:smaffei@f...]
\n> > Sent: Tuesday, July 06, 2004 12:48 PM
\n> > To: 01v96@yahoogroups.com
\n> > Subject: [01v96] Re: just got it...
\n> >
\n> >
\n> >
\n> > > Yo!
\n> > >
\n> > > I've been using it live for a while now. I recently did a show with
\n> > a friend
\n> > > where we used his older 02R and I'd rather take the V96 over the 02R
\n> > ANY day
\n> > > of the week.
\n> > >
\n> > > Live likes:
\n> > > - Auxes on faders, not tiny knobs
\n> >
\n> > yes
\n> >
\n> > > - I can actually EQ wherever I want to
\n> >
\n> > one of the reasons I ordered it.
\n> >
\n> > > - Sounds 10,000 better than a Mackie VLZ
\n> >
\n> > haven't gotten this far yet, but I'm sure you're right.
\n> >
\n> > > - I can patch direct outs to ADAT and record to an HD recorder right
\n> > off the
\n> > > board.
\n> >
\n> > you mentioned the 02R and I had a friend come do FOH for us and that's
\n> > what he used. he dumped everything off to his laptop and recorded the
\n> > whole show. That's one of the things that sparked my interest in
\n> > digital boards.
\n> >
\n> >
\n> > This is an EXCELLENT up-sell for paying customers and is also
\n> > > something that I'm 99% sure has gotten me chosen for gigs over
\n
> >to do.
\n> > > - Entire PA minus speakers, power amps, and GEQs in one affordable
\n> > box.
\n> >
\n> > I'm all about portability...
\n> >
\n> >
\n> > >
\n> > > Live dislikes:
\n> > > - Only 12 XLR inputs
\n> >
\n> > I ordered the expansion card to get the 4 extra XLRs. So, I will have
\n> > 16 XLRs and the 4 1/4", so that should be plenty for what I need
\n
> >patch
\n> > > - I feel like I have to go through hell and high water to get my
\n
> > > library entries saved with scenes. I think scene memory should<http://us.ard.yahoo.com/SIG=1298m6he7/M=288055.5065207.6192285.2127756/
\n> > automatically
\n> > > include all patching, personally.
\n> >
\n> > Haven't gotten this far yet, but I did see something about that in the
\n> > manual. I'm sure I will have to deal with this at some point...
\n> >
\n> >
\n> > > - No BNC light connector. I've gotten really good at holding a mini
\n> > Mag
\n> > > light in my mouth. :)
\n> >
\n> > What about one of those battery powered book reading lights? it would
\n> > have been nice if Yamaha would have included a BNC connector. I'll be
\n> > doing my mixing from the stage and it's usually bright enough for me
\n> > to see the board.
\n> >
\n> > > - Heavy and hard to find a good case for it.
\n> >
\n> > I posted a thread here when I first ordered my 01V96, asking about
\n> > that, but never got a reply. I contacted Grundorf and they make case
\n> > for the 01V96 (I'm waiting on a price, but I plan on ordering a case
\n> > from them with 4U underneath the mixer. of course, I'm sure you can
\n> > order as many spaces as you want, underneath the 01V96).
\n> >
\n> >
\n> > Thanks Todd!!!!!!!
\n> >
\n> > btw - would you happen to know what the latest software/firmware on
\n> > the 01V96 is supposed to be?
\n> >
\n> > Thanks again,
\n> >
\n> > Steph
\n> >
\n> > >
\n> > > Toad
\n> >
\n> >
\n> >
\n> > Yahoo! Groups Sponsor
\n> >
\n> > ADVERTISEMENT
\n> >
\n> >
\n
> >D=groups/S=1705017563:HM/EXP=1089218977/A=2193927/R=0/SIG=12h94mm4e/*htt
\n
> >p://store.yahoo.com/cgi-bin/clink?yhst-56407110520241+QADt9Y+icopydvds2.
\n
> > html> click here<http://us.adserver.yahoo.com/l?M=288055.5065207.6192285.2127756/D=group
\n> >
\n> >
\n
> > s/S=:HM/A=2193927/rand=799814152><http://us.ard.yahoo.com/SIG=129qbb8kc/M=288055.5065207.6192285.2127756/D=gr
\n> >
\n> >
\n> > _____
\n> >
\n> > Yahoo! Groups Links
\n> >
\n> >
\n> > * To visit your group on the web, go to:
\n> > http://groups.yahoo.com/group/01v96/
\n> >
\n> >
\n> > * To unsubscribe from this group, send an email to:
\n> > 01v96-unsubscribe@yahoogroups.com
\n> > <mailto:01v96-unsubscribe@yahoogroups.com?subject=Unsubscribe>
\n> <mailto:01v96-unsubscribe@yahoogroups.com?subject=Unsubscribe>
\n> >
\n> >
\n> > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
\n> > Service <http://docs.yahoo.com/info/terms/> .
\n>
\n>
\n>
\n>
\n>
\n>
\n> Yahoo! Groups Sponsor\t
\n>
\n> ADVERTISEMENT
\n>
\n>
\n
>oups/S=1705017563:HM/EXP=1089227505/A=2193927/R=0/SIG=12h94mm4e/*http://stor
\n
>e.yahoo.com/cgi-bin/clink?yhst-56407110520241+QADt9Y+icopydvds2.html>
\n
> here\t<http://us.adserver.yahoo.com/l?M=288055.5065207.6192285.2127756/D=groups/S=
\n>
\n>
\n
> :HM/A=2193927/rand=668202242> \t
\n>
\n> _____
\n>
\n> Yahoo! Groups Links
\n>
\n>
\n> *\tTo visit your group on the web, go to:
\n> http://groups.yahoo.com/group/01v96/
\n>
\n>
\n> *\tTo unsubscribe from this group, send an email to:
\n> 01v96-unsubscribe@yahoogroups.com
\n> <mailto:01v96-unsubscribe@yahoogroups.com?subject=Unsubscribe>
\n>
\n>
\n> *\tYour use of Yahoo! Groups is subject to the Yahoo! Terms of Service
\n> <http://docs.yahoo.com/info/terms/> .