{ "numMessagesInTopic": 6, "nextInTime": 910, "senderId": "3o6FT_tq6UGBOokuXwcfeLx0S9yaX1gJaovqgyCR15JN4ap-zZY45n1unorOffGNVwz8mQkI7ywJhpu5RvrQ89nW3ifV3y6sMSv6WdMb0vmP", "systemMessage": false, "subject": "Re: [01v96] Re: Check Sum error 1", "from": ""Ronny Morris" <digitakmastering@...>", "authorName": "Ronny Morris", "msgSnippet": "Ok, I powered the DAW off. I rebooted v96. I selected Restore Factory Defaults when the check sum error came up. The mixer reset. I rebooted again and the", "msgId": 909, "profile": "ronnymorris2001", "topicId": 903, "spamInfo": { "reason": "0", "isSpam": false }, "replyTo": "LIST", "userId": 136810499, "messageBody": "
> >the
\n> > What seemed to happen to me is that the internal memory of the 01v96
\n> > got corrupted somehow, and it detected that. I used it in this
\n> > configuration for the rest of my conference and had no problems. I
\n> > later let it do a factory reset, and the message went away. I have
\n> > done a couple of conferences since then and have had absolutely no
\n> > problems. I think that for whatever reason the 01v96 is a little
\n> > sensitive to things reading and writing via MIDI/USB and can get
\n> > confused, since I got the error in a cascaded setup. Perhaps 1.02
\n> > addresses this issue.
\n> >
\n> > Either way, I would copy your data out of the machine, let it reset,
\n> > and then copy it back in. Your mixer will then come up clean. If
\n> > you can repeatedly get the error by doing a set of steps, we may
\n> > learn something about what leads to that condition.
\n> >
\n>
\n> Very good TJ, I should mention that I'm running a 1.5MBps DSL connection in my first USB port on
\n
> PC and the V to the second USB port. There must be some conflict or connection between the two,is
\n> because if I power down the V before I do the PC, it cuts my DSL connection off. To restore it, I
\n> have to reboot the PC. Going from yours and Tom's info, It's a good chance that the USB conflict
\n
> the root of my check sum error. I'm going to power down the PC, than the V and upon boot up on theknow
\n> V, I'll select Restore Factory Defaults when the check sum message comes up. I'll let you guys
\n
> what happens, shortly. Thanks for the input. :O)
\n>
\n> Keep On Trackin'
\n>
\n> Ronny Morris - Digitak Mastering
\n> http://208.191.230.169/wbbs/Digitak/index.php
\n> ------Powered By Experience------
\n> --------Driven To Perfection--------
\n>
\n> ----Wink's Spam Free Audio Forum----
\n> http://208.191.230.169/wbbs/index.php
\n> --------------------------------------------------
\n>
\n>
\n>
\n> To unsubscribe from this group, send an email to:
\n> 01v96-unsubscribe@yahoogroups.com
\n>
\n>
\n>
\n> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
\n>