{ "numMessagesInTopic": 14, "nextInTime": 993, "senderId": "lggvW2sYpd_CvdnnklHtiLYU-rtr0ktbxTN3HTkSgXRQ8QMqCaqAz9YFoSr8xuFAu2dvA7eBHoU-c4xoSVQA2aaBOF4", "systemMessage": false, "subject": "Re: Low cut filter smaart follow up", "from": ""Carol" <frankwa@...>", "authorName": "Carol", "msgSnippet": "Ronny I replyed to your message but after an hour it still has not appeared . I will retry . ... the 4k frequency line as a ... will be around 950-1k, than", "msgId": 992, "profile": "petpeavey", "topicId": 986, "spamInfo": { "reason": "0", "isSpam": false }, "replyTo": "LIST", "userId": 8787581, "messageBody": "
>the 4k frequency line as a
\n>
\n> Set the HPF up on the 01v96 at 500Hz, set the 4k sweep flat but use
\n
> marker reference, go to the "start" of the roll off on the HPF (itwill be around 950-1k, than move
\n
> it down to 250Hz, you'll see what I mean. This can't be done in SMas there are no sweep lines.
\n
>This is basicly what I did but with pink noise .
\n
\n
> Pink noise is too erratic, try using a sine tone and the Smaartreadings should be more accurate. To
\n
> create pink noise, white noise passes through a "-3dB per octavedrop filter". It's best for audible
\n
> evaluations as it mirrors human acuity, but not best for mechanicalcalculation.
\n
>I wish now I had read this post before testing this morning .
\n
>Good hearing from you .
\n
> Keep On Trackin'
\n>
\n> Ronny Morris - Digitak Mastering
\n> http://208.191.230.169/wbbs/Digitak/index.php
\n> ------Powered By Experience------
\n> --------Driven To Perfection--------
\n>
\n> ----Wink's Spam Free Audio Forum----
\n> http://208.191.230.169/wbbs/index.php
\n> --------------------------------------------------
\n>
\n> > Just to clarify
\n> >
\n> > Doug
\n> >
\n> >
\n> >
\n> > To unsubscribe from this group, send an email to:
\n> > 01v96-unsubscribe@yahoogroups.com
\n> >
\n> >
\n> >
\n> > Yahoo! Groups Links
\n> >
\n> > To visit your group on the web, go to:
\n> > http://groups.yahoo.com/group/01v96/
\n> >
\n> > To unsubscribe from this group, send an email to:
\n> > 01v96-unsubscribe@yahoogroups.com
\n> >
\n> > Your use of Yahoo! Groups is subject to:
\n> > http://docs.yahoo.com/info/terms/
\n> >