{ "numMessagesInTopic": 19, "nextInTime": 1967, "senderId": "tOlPLqLlAxoo46mPtV6qZCCHux7pp8ReCvG6Mr-A5XVdSYWRaYzSorSYf8m5GxKczh9_pvUJZvDkajajKbsVXidgJ5eUbMh4DIbC2a6q", "systemMessage": false, "subject": "Re: Quadro NVS440 works - DG3 3840x2400 @ 41Hz!!", "from": ""educationk12" <educationk12@...>", "authorName": "educationk12", "msgSnippet": "Paul, Welcome to the group! You may have to change the EDID setting using a different desktop or laptop. I had this same exact problem with my Nvidia 7900GS", "msgId": 1966, "profile": "educationk12", "topicId": 1622, "spamInfo": { "reason": "6", "isSpam": false }, "replyTo": "LIST", "userId": 247597564, "messageBody": "
--- In IBM_T2X_LCD@yahoogroups.com, "Paul Grace" <paulgrace@...> wrote:
\n-
\n> My EDID is 003, and it doesn't change (I've tried setting it to 029)
\n after
\n> the "..." screen it just pops up as 003. The default for the
\nDG3/DG5 is 029
\n> (all firmware versions), but this one doesn't seem to accept
\nit--appendix A
\n> and B in the T221 user guide suggest that 029 is supported by every DDC,
\n> (mine is 6.2) and the appendix B only shows up to 4.6.
\n>
\n> Any thoughts?
\n>
\n>
\n> ________________________________
\n>
\n> From: IBM_T2X_LCD@yahoogroups.com
\n[mailto:IBM_T2X_LCD@yahoogroups.com] On
\n> Behalf Of educationk12
\n> Sent: Saturday, November 25, 2006 23:15
\n> To: IBM_T2X_LCD@yahoogroups.com
\n> Subject: [IBM_T2X_LCD] Re: Quadro NVS440 works - DG3 3840x2400 @ 41Hz!!
\n>
\n>
\n>
\n> What EDID setting did you accomplish the NVS440 to work? (or if people
\n> have suggestions on which ones to try for a VP2290b)
\n>
\n> I'm assuming this was a tiled 1920x1200 at 41Hz each setting, it's 1,2
\n> then 3,4 underneath...not 1,2,3,4 vertical. Right?
\n>
\n> MD
\n>