{ "numMessagesInTopic": 7, "nextInTime": 300, "senderId": "eFGlHDKq1GNa6kE1hzyWLj98vc0QlelWRHYpUFMJLda2cXaHT589g6g0rf-eKrTGOtEo2OPL9S2FDixQML2eHPUjG8zp", "systemMessage": false, "subject": "Re: [Radio-Programming2] Re: SABER RSS Help", "from": ""Dick" <rertman@...>", "authorName": "Dick", "msgSnippet": "Be careful with the RSS. I ve been told that the radio will lock up and require Moto repair if you try to program it with RSS older than the last version", "msgId": 299, "profile": "liftpump", "topicId": 292, "spamInfo": { "reason": "0", "isSpam": false }, "replyTo": "LIST", "userId": 539178, "messageBody": "
----- Original Message -----
\nFrom: "a12ski2001" <cegcomm1@...>
\nTo: <Radio-Programming2@yahoogroups.com>
\nSent: 28 December, 2004 18:05
\nSubject: [Radio-Programming2] Re: SABER RSS Help
\n
\n
\n>
\n>
\n> I tried a few things and found out a few things today,
\n> The CPU is a 386 16mhz
\n> The uart is ok per the motorola troubleshooting list
\n> The config and autoexec were redone exactly as per the motorola
\n> troubleshooting list.
\n> We determined that the serial port is working fine and the tech that
\n> I was working with basically said the machine is working so I am
\n> faced with my RIB may be bad but I have two. One is a motorola and
\n> the other is an aftermarket unit.
\n> The osther issue may be the version of rss I was trying.
\n> I have two I will have to get the version numbers of each one was
\n> for saber and the other system saber.
\n> So you guys have any comments??
\n> Charles
\n>
\n> --- In Radio-Programming2@yahoogroups.com, "Dick" <rertman@i...>
\n> wrote:
\n>> Charles:
\n>>
\n>> First question is about the computer's speed. Even though you're
\n> running it
\n>> in DOS,
\n>> if the CPU speed is too high, it won't work. You can get MoSlo
\n> from batlab
\n>> and use
\n>> it to slow down the clock speed of your computer. Hopefully,
\n> that'll
\n>> resolve your
\n>> problem.
\n>>
\n>> 73,
\n>>
\n>> Dick W1NMZ/6
\n>> ----- Original Message -----
\n>> From: "a12ski2001" <cegcomm1@a...>
\n>> To: <Radio-Programming2@yahoogroups.com>
\n>> Sent: 24 December, 2004 18:30
\n>> Subject: [Radio-Programming2] SABER RSS Help
\n>>
\n>>
\n>> >
\n>> >
\n>> > I am in need of some help here, This is a real novice question
\n> and
\n>> > if it dosen't belong here let me know. I have the RSS to program
\n> my
\n>> > saber radios. I have a RIB and the proper cable. But I am lost
\n> here
\n>> > I can not get the RIB to com with the computer. I am using a
\n>> > satellite pro 440cdx and I have changed the bios to turn cache
\n> off
\n>> > and I am booting from the floppy into dos mode then running the
\n> rss
\n>> > program.
\n>> > Any gudiance will be much appreciated, these older RSS's are a
\n> pain.
\n>> > Thanks very much
\n>> > Charles
\n>> > K1RIO
\n>> >
\n>> >
\n>> >
\n>> >
\n>> >
\n>> >
\n>> >
\n>> >
\n>> > Yahoo! Groups Links
\n>> >
\n>> >
\n>> >
\n>> >
\n>> >
\n>> >
\n>> >
\n>> >
\n>
\n>
\n>
\n>
\n>
\n>
\n>
\n> Yahoo! Groups Links
\n>
\n>
\n>
\n>
\n>
\n>
\n>
\n>