{ "numMessagesInTopic": 8, "nextInTime": 98, "senderId": "z4BbcM_7eq14UCI0Sg6-9y92994jo1Onrkj3nZEhJxLvxKZCh3_s6C7Ae2cdvPTRXSK-EpUV44RfJ-Rss2pwJR-STLnhgG3bQNAg", "systemMessage": false, "subject": "Re: [HDR2496] hdr early report & a question...", "from": "Jay Davidson <jayboyd@...>", "authorName": "Jay Davidson", "msgSnippet": "Dave, I ll check the HDR s set up for MTC, thanx. While responding to MMC commands remotely from the d8b, the HDR showed no audio at all sonically or visually.", "msgId": 97, "topicId": 91, "spamInfo": { "reason": "0", "isSpam": false }, "replyTo": "LIST", "userId": 0, "messageBody": "
> Interesting. The 2.03 update may help. It couldn't[Paid Net2phone Advertisement - Click Here!]
\n> hurt. You may have a
\n> word clock issue. Word sync via lightpipe is not actually
\n> addressed in the
\n> prelim manual. I was running mine on internal sync at both
\n> 44.1 and 48k with
\n> the d8b also on internal sync at either rate and there
\n> were no noticeable
\n> artifacts. The HDR sample rate changed the pitch but
\n> played back without
\n> glitches. Did the d8b automatically slave to the incoming
\n> HDR lightpipe
\n> wordclock? I don't know. I wonder if tech support would
\n> have anything info
\n> yet? I've since run the BNC wordclock from my d8b and set
\n> the HDR to slave.
\n> This shouldn't really even be necessary as lightpipe
\n> carries wordclock. But
\n> lightpipe was not an external sync option and while the
\n> opt-8 didn't mind,
\n> the DIO-8 didn't work at all in that configuration.
\n> Funny you can get track arming but no LEDs. I have
\n> full transport
\n> control, timecode display (there is a send MTC in the set
\n> up options on the
\n> HDR), but no track arming. Although the master record
\n> button works.
\n> Also having trouble with the FTP thing as usual. Was
\n> that implemented?
\n> Mike? There's nothing at all about it in the prelim
\n> manual.
\n> Other than that, I can't wait to start recording with
\n> it.
\n> Dave Pinsky
\n> Gark Studio
\n>
\n> In a message dated 12/17/00 6:31:20 PM,
\n> jayboyd@... writes:
\n>
\n> << I installed a d8b at a clients house 1 year ago. My
\n> blackface ADATs were the multitrack platform of
\n> contingency
\n> awaiting arrival of the hdr.
\n>
\n> ONE YEAR LATER, it's finally installed......The terminator
\n>
\n> switch is opposite, w/"out" being the terminated position.
\n>
\n> w/ 3 OPT's on the hdr, & 3 DIO's on the d8b,running 2.01,
\n> I
\n> was able to get all transport functions and listen 2 the
\n> demos.
\n>
\n> I can arm trax but not record on them. The LED display on
\n> the d8b doesn't run while the LED on the hdr is moving.
\n>
\n> I'm doin' all this runnin' off of the DIO's word out...
\n>
\n> The Apogee card & 2.03 will be installed 2morrow.
\n> Hopefully these problems will disappear.......
\n>
\n> Can I download 2.03 from the web onto a Mac and load it
\n> right into the d8b, or must I do so from a PC??
\n>
\n> RSVP,
\n>
\n> Thanx,
\n> J >>
\n>
\n>
\n> eGroups Sponsor
\n
>
\n> To unsubscribe from this group, send an email to:
\n> HDR2496-unsubscribe@egroups.com
\n>