{ "numMessagesInTopic": 7, "nextInTime": 475, "senderId": "UaOyztVLpgJulVkuvgdo9aztMmM6Wf74Oob2dgYV-qFla8TWY3uV0vifD6CriXR1XLGyHEo_tLm4K7MyyndZygGQAxmg1uu48HY", "systemMessage": false, "subject": "Re: Dell 1150 Wireless Card on an SG20 ver 2.5? image", "from": "pmwenzel <no_reply@yahoogroups.com>", "authorName": "pmwenzel", "msgSnippet": "I tried this with my Dell 1150 card flashed with 8.72 firmware, but do not get it to work. After insertion, I get the Wireless 128bit Installed message on", "msgId": 474, "profile": "pmwenzel", "topicId": 84, "spamInfo": { "reason": "0", "isSpam": false }, "replyTo": "LIST", "userId": 144802895, "messageBody": "
--- In magnia_sg20@yahoogroups.com, "aviator_nj" <aviator_nj@y...> wrote:
\n> Do a search in the magnia_sg10 group...there is a lot of good info on
\n> the sg20 over there.
\n>
\n> Here is a possible solution I found in a post in that group:
\n>
\n> ----------------------------
\n> After much research and frustration, I was finally able to get my
\n> Dell Truemobile 1150 wireless card to work with the SG20. This card
\n> is a rebranded Orinoco Gold card, however, it has a different vendor
\n> id and here in lies the problem. Here is a step-by-step for anyone
\n> who has a similar rebranded card which you are sure in an Orinoco.
\n> This may work for other cards that use the wavelan2_cs driver, but I
\n> have not tested any other cards.
\n>
\n> 1) Check to see if your card was identified by checking for
\n> messages in /var/log/messages and by also issuing a 'cardctl ident'
\n> with the wireless card in the slot. You should hopefully get some
\n> info queried from the card. I got the following:
\n> Socket 0:
\n> product info: "Dell", "TrueMobile 1150 Series PC Card", "Version
\n> 01.01", ""
\n> manfid: 0x0156, 0x0002
\n> function: 6 (network)
\n>
\n> 2) Pay attention to the manfid field as this is the key to getting
\n> the unidentified card working.
\n>
\n> 3) edit the file /etc/pcmcia/wavelan2_cs.conf and place the
\n> following text into the file. For my example, I placed the
\n> following text:
\n> card "TrueMobile 1150 Series PC Card"
\n> manfid 0x0156, 0x0002
\n> bind "wavelan2_cs"
\n>
\n> 4) Save the file and restart your server and you should be able to
\n> get to the wireless settings page and enable the wireless option.
\n> If this doesn't work, check the messages in /var/log/messages to see
\n> if they shed any insight.
\n> ----------------------------
\n>
\n> Hope this helps.
\n>
\n> - Brian -
\n>
\n> --- In magnia_sg20@yahoogroups.com, "jeff21212002"
\n> <jeff21212002@y...> wrote:
\n> > Hi :),
\n> >
\n> > I am stumped at this point.. Can anyone tell me what to do to get
\n> > this working correctly?
\n> >
\n> > I got a good deal on this card which is supposed to be an "exact"
\n> > copy of the Orinoco gold that Toshiba Support says "Should be auto-
\n> > recognized once you plug it in". I've tried editing the
\n> > wireless.opts and pcmcia.conf file a number of times but no luck..
\n> > I'm not even sure the system is recognizing the card.
\n> >
\n> > Any GurUz wanna lend some installation advice?
\n> >
\n> > Thanks!